Commercial Quality Washers for the Home

Staber washing machines are the most efficient washers available. It has the lowest energy, water, and detergent usage of any washer available. Staber is the only tumble action washer made in the U.S. that maintains top loading convenience; think of it as a 'top loading front loader'.

Available in Powder Coat White and Stainless Steel

Coin-Operated Models Also Available

    

STABER SYSTEM 2000 WATER CONSERVATION SYSTEM

  • Decrease operating costs up to 58% or more!
  • Uses an average of just 15 gallons of water per load and 1 ounce of detergent
  • Soft-mount installation
  • Top loading convenience
  • Pays for itself within the first year!*
  • Stainless steel inner and outer tubs
  • Exclusive four heavy-duty strut suspension
  • Two re-greasable bearings per shaft, supported on front and back
  • Total front access for easy maintenance
  • No transmission or agitator to replace
  • Higher extract speeds for reduced drying time
  • No lower water seals; eliminates future leaking problems
  • Automatic detergent/bleach and softener dispenser
  • Patented tub design creates unique water pumping action for better cleaning

*Depending on the cost of electricity and water

View the printable brochure in Adobe Acrobat

Staber Brochure Page One Staber Brochure Page Two

 

Click here to see and hear the Staber in action as a Windows Movie Player staber.WMV

How Does Staber Compare With the Traditional Top Load Agitator Washer You May Be Currently Using?

Spec sheet for models:  HXW 2304, 2404, 2504

PREWASH = 5 MIN. PLUS FILL TIME
WASH TIME = UP TO 15 MIN. PLUS FILL TIME
RINSE TIME = TWO 5 MIN. RINSES PLUS FILL TIME
SPIN TIME = 5 MIN.
DECAKE/INDEX TIME = 3 MIN.

(Fill time is determined by water inlet pressure)

  NORMAL WATER LEVEL LOW WATER LEVEL
NORMAL = 16.5 GAL 12 GAL
PERMANENT PRESS = 16.5 GAL 12 GAL
DELICATE = 16.5 GAL 12 GAL
PRE-WASH & NORMAL = 22 GAL  
  • WATTS OF ELECTRICITY PER LOAD

  • 110-150 WATT HOURS

  • MOTOR TYPE

  • UNIVERSAL/DIGITAL-ELECTRONICALLY CONTROLLED MOTOR

  • MOTOR H.P. RATING

  • LESS THAN ˝

  • MOTOR AMPS BEING DRAWN IN WASH

  • ~ 5 TO ~ 6 AMPS

  • MOTOR AMPS BEING DRAWN DURING SPIN

  • ~ 3 AMPS

  • SPIN CYCLE RPM

  • ~ 400 (DELICATE & PERM) & 600 up to 750 (NORMAL)

  • SIZE OF MACHINE IN INCHES

  • WIDTH – 27; DEPTH – 26; BACK HEIGHT – 42; HEIGHT WITH DOOR UP - 55

  • MACHINE WEIGHT

  • NET--175 LBS.                      SHIPPING – 240 LBS.

  • REPAIR FACILITIES AND ARRANGEMENTS

  • The unit comes with a manufacturer’s warranty on parts. The Staber washer is designed to be serviced by the end user.  Total front access and simple design allows the user to maintain and service their machine without having to pay large repair bills. Staber Industries offers guidance on do-it-yourself maintenance and repair.  All replacement parts are shipped factory direct by FedEx or UPS to the end user.       

    Click Here to Download the Repair Manuals

  • WARRANTY

  • Staber Industries Will Pay For:

          -One Year: Replacement parts and repair labor to correct defects in materials or workmanship.

          -Five Year:  Replacement parts for the Bearing Assembly and Suspension System if defective in materials or workmanship.

          -Twenty-Five Year:  Replacement parts for the Outer Tub Module if the tub develops a water leak caused by rust-through as a result of defective materials or workmanship.

    Click Here to Register Your New Washer

     

    For More Information please call or write us:

     

    TEL: (808) 523-0711      EMAIL: info@solarsupply.com

     

     

    Hours: Monday-Friday 7am-4:30pm,     Saturdays 8am-1pm   Hawaii Standard Time

    To See More About Staber Washing Systems, Click Here