The Universal Tile Mount uses the QBase foundation and two spun aluminum cone flashings to keep out the rain. The malleable top flashing conforms to fit virtually any tile roof.
The primary flashing at the roof deck forms a waterproof shield isolating all penetrating fasteners from corrosive water intrusion. The top flashing is malleable, so it works equally well for curved and flat tile roofs. Both flashings feature a spun aluminum cone, with no seams to fail in extreme climates. The reinforced QBase makes an extraordinarily strong foundation. Ideal for both retrofit and new roof installations.
Features Flashes all tile roofs, curved or flat Flashed at both the deck and tile level Large malleable aluminum top flashing QBase is the strongest off-the-shelf mechanical mount All fasteners and hardware included All exposed hardware is stainless steel Attaches to roof structure with 2 or 4 fasteners 100% IBC, UBC compliant Meets or exceeds all NRCA & TRI standards and practices 10-year warranty; 50-year expected life Works with all leading racks Patents pending
Available Finishes Aluminum mill Bronze anodized
Parts and Materials
Each mount kit (12 per box) includes:
Cast aluminum QBase Aluminum post, 1.25'' x 6.5'' 9'' x 9'' spun aluminum cone sub-flashing 18'' x 18'' spun aluminum cone malleable flashing Two zinc-coated steel lag bolts, 5/16'' x 3'' Stainless steel machine bolt, 5/16" x 1" EPDM post collar/counter flash EPDM-bonded stainless steel washer, 5/16'' x 1¼'' Stainless steel fender washer Stainless steel lock washer, 5/16'' Grade-8 machine bolt, 5/16'' x 3/4''
Specifications Flashing Size 18" x 18" Pullout/shear 3857 lbs. average pullout (Douglas fir); 570 lbs. average shear Tools needed for installation Tape measure Drill with 7/32" wood bit Ratchet with 1/2" socket Caulking gun One tube of appropriate sealant 30lb felt paper Whisk broom or vacuum Roofers bar or shingle ripper
Applicable roof types All tile roofs, curved or flat Available Finishes Aluminum mill Bronze anodized